Effects of typical additives on the thermal stability of ammonium peroxydisulfate

Ammonium peroxydisulfate (APS), one of the most widely used inorganic peroxides in the process industries, is a thermally unstable peroxide and potent oxidizer due to the presence of peroxy bond in the molecule and is incompatible with most substances. To investigate the effect of typical additives on the thermal decomposition of APS, in this paper, diamine phosphate (DAP), monoamine phosphate (MAP), and aluminum hydroxide (AH) were selected as additives; pure APS and samples with 10 wt% and 20 wt% of additives were first tested by differential scanning calorimetry (DSC). The experiments and analysis showed that the samples with 10 wt% of additive had better thermal stability than those with 20 wt% of additive. After screening, the three groups of 10 wt% AH, 10 wt% MAP, and 20 wt% MAP additive conditions could be considered to have a better thermal stability effect on the thermal decomposition of APS. Four groups of samples were, in turn, tested by Phi-Tec II. The adiabatic results showed two discontinuous exothermic processes; 10 wt% AH promoted the weak exothermic effect in the first stage. In contrast, the three groups of additives in the main exothermic stage showed different degrees of inhibition, and the inhibiting effect was ranked as 10 wt% AH, 10 wt% MAP, and 20 wt% MAP in order. Finally, the self-accelerated decomposition temperature (SADT) was calculated under the 25 kg standard package. The adiabatic results, including SADT, were combined to render feasible recommendations for the use of additives, which provides references for the packaging and transportation of additives and their applications.     

Dynamic risk assessment for underground gas storage facilities based on Bayesian network

Loss of the underground gas storage process can have significant effects, and risk analysis is critical for maintaining the integrity of the underground gas storage process and reducing potential accidents. This paper focuses on the dynamic risk assessment method for the underground gas storage process. First, the underground gas storage process data is combined to create a database, and the fault tree of the underground gas storage facility is built by identifying the risk factors of the underground gas storage facility and mapping them into a Bayesian network. To eliminate the subjectivity in the process of determining the failure probability level of basic events, fuzzy numbers are introduced to determine the prior probability of the Bayesian network. Then, causal and diagnostic reasoning is performed on the Bayesian network to determine the failure level of the underground gas storage facilities. Based on the rate of change of prior and posterior probabilities, sensitivity and impact analysis are combined to determine the significant risk factors and possible failure paths. In addition, the time factor is introduced to build a dynamic Bayesian network to perform dynamic assessment and analysis of underground gas storage facilities. Finally, the dynamic risk assessment method is applied to underground gas storage facilities in depleted oil and gas reservoirs. A dynamic risk evaluation model for underground gas storage facilities is built to simulate and validate the dynamic risk evaluation method based on the Bayesian network. The results show that the proposed method has practical value for improving underground gas storage process safety.     

混凝气浮+SBR处理再生花炮纸工艺废水的应用

采用混凝气浮+SBR处理年产1万t再生花炮纸工艺废水,对SS、CODCr、BOD5的处理效率分别为96.2%、96.2%、93.1%,最大日均值排放浓度分别为64mg/L、80.7mg/L、26mg/L,排放负荷分别为0.59kg/t、0.63kg/t、0.22 kg/t,均未超过标准限值的要求(pH范围为6.14-7.20);CODCr年排放总量5.4t小于20t/年;纸浆回收率92.0%、白水回用率94.4%、水循环利用率93.2%达标;实现"三排三率"六达标。     

活性焦联合脱硫脱硝技术及发展方向

本文介绍了活性焦特点、活性焦联合脱硫脱硝技术的反应机理及工艺流程、活性焦联合脱硫脱硝技术的优缺点及发展方向。指出了活性焦联合脱硫脱硝工艺具有可以实现同时脱除S02、NOx和粉尘,脱除效率高,投资小等优点,通过加热再生活性焦,可获得高浓度的SO2气体,用于生产硫酸、液体二氧化硫或硫磺,有效回收硫资源。该技术具有流程简单、占地面积小、无二次污染、费用低、应用范围广等特点。     

基于大型乙烯成套装置工艺安全的变更管理

介绍了工艺安全变更管理的概念及相关标准法规,结合国内变更管理的现状,提出了大型乙烯成套装置工艺安全变更管理建议。     

石化企业苯类物质非密闭操作过程的职业暴露分析

采用职业卫生学调查和职业暴露风险评估方法,对选定的苯类物质非密闭操作过程较集中的芳烃装置进行职业暴露分析和评估,为石化企业苯类物质的健康风险控制提供依据。     

重金属污染物在土壤中迁移规律及修复技术研究

世界各国都认识到重金属污染的严重性.多数国家开展了污染场地的修复工作,研究和开发出多种土壤重金属污染修复技术,重金属污染土壤修复技术有物理化学修复技术、植物修复、微生物修复技术和电动修复技术.但这些土壤修复技术的成本高,只重视土壤修复,土壤修复技术更重要的部分是地下水系统的修复,不能忽视地下水系统与土壤修复的完整性,否则会造成二次环境污染.本文在分析土壤中重金属污染物迁移规律的同时提出完整的土壤修复新技术CH-PRB工艺.     

城市垃圾渗滤液污染控制技术综述

介绍了垃圾填埋场渗滤液的来源以及水质特点,结合国内外研究和应用实例,对垃圾渗滤液处理方式及处理技术进行了综述。比较了合并处理等三种垃圾渗滤液处理方式的优缺点,阐述了物化处理技术和生物处理技术在垃圾渗滤液处理中的应用。在此基础上,建议渗滤液处理应综合考虑水质水量、经济技术及环境等因素,优先考虑场内建设渗滤液处理系统,对于难处理的渗滤液可以考虑采用"预处理-生化处理-高效物化"联合工艺处理。     

基于模糊综合评判法对集中供热锅炉环保设施综合评价研究

以乌鲁木齐市某集中供热锅炉污染物减排方案为例,通过建立脱硫除尘设施综合评价指标体系,运用层次分析法确定指标权重,利用模糊综合评判法分别对两种除尘设施情况下的环境效益、经济效益以及设施能耗、物耗等指标着手,进行综合评价,最终评选出较优实施方案.评选结果表明：袋式除尘＋石灰石-石膏法脱硫除尘设施方案运用于该集中供热站综合效益较好,可有效实现污染物减排,为今后燃煤锅炉环保设施的评选提供一定的参考作用.     

大孔网状聚氨酯载体MBBR工艺处理低浓度硝基苯废水实验研究

利用大孔网状聚氨酯载体在MBBR工艺条件下,研究了系统挂膜与启动过程,同时利用挂膜成熟稳定的载体进行低浓度硝基苯废水处理实验。研究结果表明,在20℃条件下培养的活性污泥生长状况良好,挂膜速度快,生物膜厚度大,耐冲击负荷。在MBBR反应时间24 h、材料投加量为1/4、硝基苯初始浓度为2.095mg/L的条件下,处理低浓度硝基苯废水的效果最好,CODcr去除率为92.58%,硝基苯去除率为49.82%。